5.376 kWh
51.2 V / 105 Ah
A compact source configuration for golf carts and commercial passenger vehicles where fitment and controlled fleet replacement are the priority.
- Continuous
- 105 A
- 10 s peak
- 300 A / 10 s
Commercial fleet battery
51.2 V / 125 Ah
6.4 kWh
An extended-capacity 51.2 V source configuration for commercial vehicles with longer operating windows or higher daily utilization.
Source specifications
Electrical and enclosure references.
Use these values for initial engineering review. The final quotation controls the approved drawing, terminals, mounting, protection thresholds and accessories.
- Nominal voltage
- 51.2 V
- Nominal capacity
- 125 Ah
- Nominal energy
- 6.4 kWh
- Continuous discharge
- 125 A
- Short-duration discharge
- 375 A / 10 s
- Secondary peak reference
- 300 A / 30 s
- Enclosure reference
- Approx. 580 × 358 × 245 mm; 612 mm maximum length reference
- Dimension status
- Approximate drawing reference
- Communication
- CAN, Bluetooth
- Chemistry
- LiFePO4 source configuration
BMS and communication
Protection and operating visibility built into the system review.
Source configurations document integrated monitoring and protection functions. Communication availability and thresholds remain configuration-dependent.
Overcharge
Over-discharge
Overcurrent
High/low temperature
Short circuit
Available interfaces
CANBluetooth
ALEO Smart System can be discussed for status, voltage/current trends, temperature, cell difference and alarm review. Connectivity, location and buyer access are confirmed with the final configuration.
Vehicle integration
What we need before confirming fit.
A voltage match alone does not confirm compatibility. Mechanical, electrical, charging and operating inputs are reviewed together.
01Vehicle make and model
02Original battery voltage and type
03Battery-bay L × W × H
04Motor and controller current
05Charger input, output and plug
06Terminal, cable and mounting layout
07Daily route, terrain and passenger load
08Fleet quantity and target timing
Document status
Evidence follows the final source configuration.
EMC evidence exists for selected 51.2 V source models, including the relevant source family. Final source identity and document scope are checked before documents are offered to the buyer.
Confirmed during quotation
- Exact drawing, mounting and terminal layout
- Charger, display, harness and communication scope
- Operating temperature, IP rating and cycle-life conditions
- Model-specific transport and conformity documents
- MOQ, sample plan, lead time and warranty terms
Other configurations
Compare another starting point.
8.064 kWh
76.8 V / 105 Ah
A higher-voltage source configuration for sightseeing and passenger fleets requiring 76.8 V nominal architecture.
- Continuous
- 105 A
- 10 s peak
- 300 A / 10 s
Project RFQ
Confirm this configuration against your vehicle.
Share vehicle, battery-bay, controller, charger, route and quantity information for an initial fitment and document review.